Repair, Cleaning And Maintenance - Blumfeldt Garden Hero Manual De Instrucciones

REPAIR, CLEANING AND MAINTENANCE

WARNING
Risk of injury! Remove the safety key when the robot mower is
not in use and before it is transported, cleaned or stored.
Repairing the boundary wire
If the boundary wire gets cut or
breaks for any reason (indicated
by solid red light on charging
station), you need to locate and
repair it. You will need to use one
of the splicing clips provided. First
take up the slack in the wire so
there is some overlap.
The clip has two channels in it. Push
one end into one channel and the
other end into the other. The wire
needs to go right in, and can even
protrude from the other end.
EN
81