General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PFBS 12 B6 Traducción Del Manual De Instrucciones Original

WARNING!
► Depending on the manner in which the power tool is being used, and in particular the
kind of workpiece that is being worked, the vibration and noise emission values can
deviate from the values given in these instructions during actual use of the power tool.
► Try to keep the load as low as possible. Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working time. Wherein all states of operation
must be included (e.g. times when the power tool is switched off and times where the
power tool is switched on but running without load).
General power tool safety warnings
WARNING!
► Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
│ GB │ IE
■ 4 PFBS 12 B6