INTENDED USE
The NC° Thermometer (Gen 2) is a medical digital thermometer (direct
mode) for the self-measurement of human basal body temperature. The
device transmits the measured values to the Natural Cycles app via a Blue-
EN
tooth 4.0 interface. The device is intended for use with the Natural Cycles
app. The device cannot be operated with other apps.
SAFETY INSTRUCTIONS
The device must be used solely for the purpose described in these operat-
ing instructions. The manufacturer shall not be held liable for any damages
resulting from improper use.
Do not allow the thermometer to fall on the floor. The thermometer is not
shock-resistant or impact-resistant.
Protect the device from dirt, dust and strong sunlight and keep the device
away from excessive heat or cold.
Using the thermometer in a way that does not comply with the intended
operating conditions can result in inaccurate measurement values.
Before each measurement, check the integrity of the measuring tip. A dam-
aged measuring tip can cause injuries.
Do not bite or bend the sensor. This can cause damage and lead to mal-
functions.
The use of this device near mobile phones, radios or other strong electro-
magnetic fields can cause errors and malfunctions. Maintain a distance of
at least 3.3 metres from such devices when using the device. If you cannot
maintain the minimal distance check that the thermometer is working cor-
rectly before using it.
The thermometer contains small parts that could be swallowed by children.
Do not leave the device unattended with children.
Do not open the device (except when changing the battery).
If the device is not being used for an extended period of time, remove
the battery.
Always store the thermometer in the protective cover.
If the device has been stored at temperatures below 10°C or above 40°C,
allow it to stand at room temperature for at least 2 hours before using it.
EN-2
DEVICE DESCRIPTION
DEVICE DESCRIPTION
1
1
Gold-plated measuring tip
2
Bluetooth button
3
Illuminated display
DISPLAY
7
6
5
4
1
Temperature unit
2
Bluetooth data connection
3
Battery display
4
Date
3
2
4
5
4
On/off button
5
Battery compartment
1
2
3
5
Memory mode
6
Synchronising
Time
7
EN-3
EN