Descargar Imprimir esta página

Buttons For The Operation Of Other Teac Components - Teac AG-D9100 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Buttons for the Operation of Other TEAC
Components
1 CD SYNC button
When this receiver is used in a system with a TEAC
CD Player and a TEAC cassette deck (with full-logic
control), it is possible to synchronize the operations
of the CD player and cassette deck, so that they can
be started at exactly the same time for copying a CD
onto a tape.
Note:
In this configuration, the CD player's CD/DECK SYNC
terminal and the cassette deck's CD/DECK SYNC
terminal should be connected using the optional
WR-7000 sync cable.
Synchronized operation of the CD player and
cassette deck can be started by pressing either the
CD SYNC button on the remote control unit or the
CD SYNC button on the cassette deck.
2 TAPE I buttons
The TAPE I mechanism of a double-transport
cassette deck with full-logic control can be operated
using these buttons.
Notes:
To start recording, simply press the RECORD button;
it does not have to be pressed together with PLAY.
If the TAPE I mechanism of the double-transport
cassette deck does not have a recording function,
pressing the TAPE I RECORD button will have no
effect.
3 TAPE II buttons
The TAPE II mechanism of a double-transport
cassette deck with full-logic control can be operated
using these buttons. They are also used to operate a
single-transport cassette deck with full-logic control.
Note:
To start recording, simply press the RECORD button;
it does not have to be pressed together with PLAY.
4 CD buttons
MUSIC SKIP (µ,≤) buttons: Each time these are
pressed, the pickup moves to the beginning of the
next tune in either the forward or reverse direction.
If held depressed, skipping continues until the button
is release.
PAUSE (π), PLAY/PAUSE (Á/π) buttons:
To temporarily stop CD play, press the PAUSE
button if the CD player has an independent PAUSE
button; press the PLAY/PAUSE button if it has a
PLAY/PAUSE button.
STOP (ª) button: Press to stop the CD player.
DISK SKIP button: Selects the next disc in a CD
auto-changer.
REPEAT button: Each time the REPEAT button is
pressed, the REPEAT PLAY mode of the CD player
changes.
– 25 –

Publicidad

loading