Tronic TLD 2 A1 Instrucciones De Uso página 16

♦ The mobile phone is not placed correctly on the charging
pad and induction charging does not start. Check the
position of the mobile phone (see section Wirelessly
charging a mobile phone).
The operating LED 1
♦ The mobile phone is not compatible with Qi induction
charging technology and cannot be charged. Use a
suitable adapter to charge your mobile phone by
induction charging.
♦ Metal plates are used in some mobile phone covers.
The operating LED 1
D
plates. o not use the covers when induction charging.
Remove them from the mobile phone beforehand.
The operating LEDs 1
♦ The green flashing is triggered when an incompatible
USB mains adapter or cable is used. Make sure that a
compatible USB mains adapter and cable are used (USB
mains adapter not supplied, see section Technical data).
NOTE
► If you cannot solve the problem with the above-men-
tioned solutions, please contact the Service Hotline
(see section Service).
TLD 2 A1
5 4
/2 flashes blue.
5 4
/2 may react to these metal
5 4
and 2 flash green.
GB │ IE │
13 ■