c)
Do not touch the unit with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the unit or
to pull the plug out of the socket. Keep the cord away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cords increase the risk of
electric shock.
e)
When operating the unit outdoors, use an extension cord designed for outdoor
use. Using an extension cord designed for outdoor use reduces the risk of
electric shock.
f)
Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or unit itself in water
or other liquid. Do not use the unit on wet surfaces.
h)
CAUTION - THREAT TO LIFE! When cleaning or using the unit, never immerse it
in water or other liquids.
i)
Do not use the unit in rooms with very high humidity / in the immediate vicinity
of water tanks!
j)
Do not allow the machine to get wet. Risk of electric shock!
2.2.
Safety in the workplace
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c)
• If you have any doubts as to whether the product is working properly or if it
is damaged, contact the manufacturer's service department.
d)
Only the manufacturer's service department can repair the unit. Do not carry
out repairs yourself!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g)
Use the unit in a well-ventilated area.
h)
Running the unit can generate dust and splitter, protect bystanders against any
harm.
i)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.