Gymrex GR-MG73 Manual De Instrucciones página 30

The extension piece will come out of the extension jack [5A] when unfolding. Secure
the handrail in its upward position by applying the clamp over the joint in the middle
of the jack [5].
2. Install the storage cradle [1] on top of the handrail [2] by aligning the cradle holes
with the handrail holes. Use the Allen key to tighten the included bolts (2 pcs.) in
the aligned holes.
3. Take the power cord. Plug the 3-pin connector into the receptacle at the base of
the appliance. Plug the mains connector on the other end of the power cord into a
mains outlet.
4. Set the power switch (I/O) in front of the appliance to "I" – this will turn on the
appliance. The display will read "0" for every setting.