Gymrex GR-MG73 Manual De Instrucciones página 31

5. Insert the emergency key [7]. Clip the emergency key cable to your garment. If
you fall, slip, or trip, the cable will pull out the emergency key, isolating electrical
power from the product, which will stop immediately.
6. Put on the remote control wristband.
7. Enter the desired setting values for time, distance, and calories to burn:
• Select the setting with the M button [17] (the speed is not selectable here)
• Input the setting value: pressing the "+" button [14] increases the value,
pressing the "-" button [15] reduces the value
Default settings:
Time
Distance
Calories
8. Set the speed:
(a) Select one of the predefined training programs:
• Press the P button [13] repeatedly to cycle to one of the 6 training programs.
• The default time setting for every program is 30 minutes – once a program is
selected, the display [8] begins flashing "30 minutes". Operate the buttons [14]
and [15] to extend or reduce the program time.
Default value
30 minutes
1 km
50
Setting range
5 to 99 minutes
0.5 to 65 km (in
0.5 km
increments)
10 to 995 (in 5
calorie
increments)