The instruments are not appropiate for use in live circuits.
Only touch test leads and test probes at handles provided.
The tester complies with all EMC regulations. Nevertheless it can happen in rare
cases that electric devices are disturbed by the electrical field of the tester or the
tester is disturbed by electrical devices.
Never use the tester in explosive environment.
Tester must be operated by trained users only.
Avoid heating the device by direct sunlight. This is the only way to ensure proper
functioning and a long service life.
When modifying or changing the instrument, the operational safety is no longer
ensured. The device may only be opened for replacing the batteries.
Never operating with the device on a higher voltage than in the technical data!
Otherwise, the device can be destroyed or permanently damaged.
Appropriate usage
The instrument may only be used under those conditions and for those purposes for
which it was conceived. For this reason, in particular the safety references, the tech-
nical data including the environmental conditions and the usage in dry environments
must be followed.
EN
17