Publicidad
Idiomas disponibles
Idiomas disponibles
Cod. 94717-94718-94719
h). It is necessary reduction in power due to use in higher temperatures, altitudes and
humidity as below conditions.
1) Max Working Temperature: 40°C
2). Max altitudes: 1000 m
3) Max humidity: 95%
3). Operation
a). Do not operate the engine in a confined space where dangerous carbon
monoxide fumes can collect
b). Keep the generator free of oil, dirt and other impurities.
c). Please always place the appliance on even and stable surfaces.
d). Never operate the appliance inside buildings or in an environment without
proper ventilation, like collieries, caves, excavations and bilges. Pay attention to air
flow and temperature.
e). Ensure that extension cords, power cords and all electric components are in
proper condition. Never operate electric tools with damaged or defective cords.
f). Do not operate or store the appliance in wet or humid surroundings or on highly
conductive surfaces such as metal coatings or steel constructions.
g). Ensure the sound absorber and air filter work properly. These parts serve as flame
protection in case of misfire.
h). Before connecting electric leads the appliance must reach its full speed.
Disconnect leads before switching off the motor.
i). To prevent injury by electric shock, ensure the fuel tank is not completely empty
while electric leads are connected.
j). The load must not exceed the power marked on the rating label of the generator.
Overloading may result in damage to, or a shorter life of the appliance.
k). To avoid possible burn injuries, do not touch the exhaust system or other parts of
the motor or generator that become hot during operation. Pay attention to the
warnings on the generating set.
l). Do not connect the appliance to household outlets. The generating set must not
be connected to other power sources, such as the power company supply mains. In
special cases where stand-by connection to existing electrical systems is intended, it
shall only be performed by a qualified electrician who has to consider the
differences between operating equipment using the public electrical supply
network and operating the generating set.
m). The motor must not be operated with excessive rotary speed. The operation of
the motor with excessive rotary speed raises the risk of injury. Parts which affect the
rotary speed must not be altered or replaced.
n). Regularly check for leakage or traces of abrasion in the fuel system, such as
porous pipes, loose or missing clamps and damage to the tank or tank cap. Before
use all defects must be repaired.
o). Work only in daylight or in good artificial light.
p). Never pick up or carry a machine while the engine is running
q). Stop the engine:
- whenever you leave the machine
19
Publicidad
