Fm Radio - auna SELECT Manual De Instrucciones

EN

FM RADIO

FM radio mode receives analogue FM radio and displays RDS (Radio Data
System) information about the station and programme (where broadcast).
To enter FM mode, either press the SOURCE button until FM mode appears
on the screen or select Menu > Main menu > FM.
Channel selection
To search for a radio channel, press the rotary control. The frequency
display starts counting upwards on the screen while the FM stations are
being scanned. Alternatively, you can search for stations by holding down
the buttons or , manually tune in stations by briefly pressing
these buttons, or turn the rotary control.
Saving a radio channel
To save an FM radio channel, press and hold the PRESETS button until "save
preset" is displayed on the screen. Select one of the 20 presets (on the
remote control) to save the currently playing radio station.
To play back a saved channel
To recall a saved radio channel, briefly press the PRESETS button and then
select a channel from the memory list. When a stored station is played
back, the star symbol and the corresponding memory location number
are displayed at the bottom centre of the screen.
62