KALLISTA Bodyspray P22077 Instrucciones De Instalación página 4

INSTALLATION INSTRUCTIONS
Install the Plaster Guard
Elbow (or Tee)
Install the Plaster Guard
‰ Push the plaster guard over the temporary nipple until snug against the face of the elbow/tee.
Set the Pipe Depth
‰ To adjust the pipe depth, use a level or straight edge to align the appropriate arrow on the plaster guard
with the front face of the studs.
NOTE: Thin wall installations have a finished wall thickness less than 1/2" (13 mm).
‰ Thin Wall Installation: align the "Thin Wall Installation" mark with the front face of the studs.
‰ Standard Wall Installation: align the edge of the plaster guard with the front face of the studs.
‰ Install appropriate backing and strap the pipes at the adjusted depth.
1506293-2-A
4 of 23
2. INSTALL THE PLASTER GUARD AND SET PIPE DEPTH
Align the mark
with the front of
the stud face.
Set Pipe Depth
Thin Wall
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Bodyspray
Align the mark
with the front of
the stud face.
Standard Wall