universalblue ULLBL45-20 Manual De Instrucciones página 59

9-10
11-12
13-15
16-20
21-26
27-38
39-62
FILL THE SALT TANK
Always use salt for the dishwasher. The use of salt will help prevent corrosion of the
tank.
Attention!
Use only salt specially designed for dishwasher use. All other types of salt not
specifically designed for use in the dishwasher (especially table salt) will damage the
water softener. In case of damage caused by improper use of salt, the manufacturer
is not responsible for the damage caused and the dishwasher will lose the warranty.
The salt container is located below the bottom basket and should be filled just before
starting one of the complete wash programs. To fill it out, follow the steps below:
1. Remove the bottom tray, then unscrew and remove the lid from the salt container.
2. If it is the first time you fill the container, fill 2/3 of its volume with water (about 500
ml).
3. Place the end of the funnel (supplied) in the hole and insert approximately 1.2 kg of
salt. It is normal for a small amount of water to flow out of the salt container.
4. Carefully retighten the cover.
5. Generally, the salt warning light will turn off in 2-6 days after the salt container has
been filled.
After the first wash cycle, the control panel light turns off.
NOTES:
• The salt tank must be refilled when the salt warning light on the control
panel illuminates. Even if the salt container is full enough, the indicator light
Soft 1.2-1-4
Medium 1.5-1.8
Medium 1.9-2.1
Medium 2.2-2.9
Hard 3.0-3.7
Hard 3.8-5.4
Hard 5.5-8.9
H1
H2
H3
H4
H5
H6
H7
59