Publicidad
26/27
04. Components
1 Pressure regulator control
2 Device anchoring support
3 Air inlet
4 Air outlet (s)
5 Manometer
6 Automatic purge
7 Semi-automatic purge
8 Cup
9 Sintered bronze filter
10 Coalescent filter
11 Activ charcoal filter
05. Warnings
Before putting the unit into operation, and especially after each cleaning and/or repair operation,
a check must be made that the gun components are securely tightened and that the air and/or
product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as appropriate.
The unit is easy to handle thanks to its design and the simplicity of its mechanisms. No special
training is required for handling the unit. Use it according to the operating, maintenance and sa-
fety instructions indicated in this manual and follow the application methods indicated to obtain
the required quality of finish.
Before putting the unit into operation, we recommend you to clean the equipment as it has been
subjected to functional tests and before packaging it is treated internally with a protective coating,
some of which may still remain. Remove any residual grease applied during assembly.
Do not use corrosive or abrasive products
The unit has been designed for long service. If you need to apply special products, please con-
tact SAGOLA S.A.U..
Read and apply all the information, instructions and safety measures indicated by the manu-
facturer of the products to be applied (thinners, etc.) as these may provoke chemical reactions,
fires and/or explosions, or be toxic, irritant or harmful and in all cases dangerous for the health
and personal safety of the user and of other persons nearby (see chapter on Safety and Health).
In order to make any check, repair or operation, first disconnect the unit from the fluids network.
1
3
9
5
6
ENGLISH
2
10
7
7
4
11
8
Publicidad
