Setting Thermostat Max. Temp - Hansgrohe PuraVida 15771 Serie Modo De Empleo / Instrucciones De Montoje

Setting thermostat to a maximum
temperature (Optional)
The desired maximum temperature (43°C) can be
preset using the safety function. Proceed as follows:
1. Undo the screw and pull off the handle.
Undo the fixing screw. (fig.1).
2. Remove the faceplate, the sleeve and the spindle
extension (fig.2).
3. Remove the circlip from the spindle and slide off
the locking ring (fig. 3).
4. Turn the spindle until the required maximum
temperature is reached (43°C). You will need to
use a thermometer (fig.4).
5. R e p l a c e t h e l o c k i n g r i n g b a c k o n t o
the spindle as shown. Refit the circlip.
Push the sleeve onto the thermostat cartridge
ensuring the notch on the sleeve is in the 12
o'clock position. Fit the faceplate over the sleeve
and push-fit evenly into place.(fig.5).
6. Rotate the handle so the button is positioned
at 12 o clock and re-fit onto the spindle.
Tighten the screw.(fig.6)
1
2
3
4
5
6
43°
13