Contents Of Pack; Installation; Assembly - FANATEC SPEEDTER PURE Manual

1.0 Contents Of Pack

1 SPEEDSTER ® PURE steering wheel
1 pedal unit
1 table mount
2 leg fasteners
1 manual

2.0 Installation

I M P O R TA N T:
Under no circumstances should you insert or remove the
!
SPEEDSTER ® PURE from your console while it is switched on.
This could damage your steering wheel and/or console, and
invalidate your warranty.

2.1 Assembly

Attachment to the table:
Attach the table fastener to the bottom side of the steering wheel
by passing the metal retaining clip (1) through the table fastener
(2) and putting both into the opening (3). Tighten the screw (4)
until the steering wheel is securely attached to the table (5).
All manuals and user guides at all-guides.com
2
Attachment to the legs:
Put both leg fasteners (6, 7) into the intended openings on the
bottom side of the steering wheel. Please pay attention to the
correct mounting position.
After the pins were inserted into the opening, the leg fastener must
be pressed to the outside until the fastener clicks noticeably into
place. It will function more easily if you press first on the upper bolts
and then on the lower bolts.