Operation - auna SELECT Drive Manual De Instrucciones

OPERATION

Connect to power supply
Connect one end of the mains cable to the amplifier and the other end to a
wall socket. Move the on/off button to the "ON" position. The LED indicator
lights up red and the amplifier is in standby mode.
Switch on
1. Activate the amplifier by pressing the STANDBY button on the device or
the standby button on the remote control.
2. The LED indicator lights up white as soon as the amplifier is active.
Input and output source selection
1. Selecting the input source: turn the SOURCE/SPEAKER knob on the
front of the device or press the INPUT UP/DOWN buttons on the remote
control until the LED next to the desired input source lights up.
OPT
COAX
TUNER
PHONO
CD/DVD
LINE 1
LINE 2
LINE 3
BT
2. Selecting the output source: press the VOLUME/MUTE button once to
switch to the output source. Then turn the SOURCE/SPEAKER knob on
the front of the device or press the SPEAKER UP/DOWN buttons on the
remote control until the LED next to the desired output source lights up.
Device with optical digital sound output
Device with coaxial digital sound output
Radio device
Record player
CD/DVD player
External source with AUX connection
BT device
EN
23