Descargar Imprimir esta página

Intended Use; Safety Informations; Environmental Protection - BGS technic 8501 Instrucciones De Uso

Ocultar thumbs Ver también para 8501:

Publicidad

Idiomas disponibles

Idiomas disponibles

ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

The riveting tool is designed for repairing or riveting of timing chains. The new timing chain will be
pulled over the sprockets with the help of the old chain and eventually gets riveted, thus making any
disassembly of the timing chain box unnecessary.

SAFETY INFORMATIONS

Keep children and other persons away from the working area.
Do not allow children to play with this tool or its packaging.
Do not use the tool if parts are damaged.
Use the tool for the intended purpose only.
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Timing Chain Riveting Tool
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8501
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading