Safety In The Workplace; Personal Safety - MSW -M-ABP-1100 Manual De Instrucciones

b) Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
c) Make sure the power source is a 12V DC. Higher voltage will damage the pump.

2.2. Safety in the workplace

a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents.
b) Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust.
c) • If you have any doubts as to whether the product is working properly or if it
is damaged, contact the manufacturer's service department.
d) Only the manufacturer's service department can repair the unit. Do not carry
out repairs yourself!
e) In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f) No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g) Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
h) Keep the packaging and small assembly parts out of the reach of children.
i) Keep the unit away from children and animals.
j) When using this unit together with other units, also follow the other
instructions for use.
Please note! Keep children and other bystanders safe while operating
the unit.

2.3. Personal safety

a) The unit is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the unit.
b) The unit may be operated by persons who are physically fit, capable of
operating it and appropriately trained, and who have read this instruction
manual and have been trained in occupational safety and health.
c) The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.