2.4 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
Replacement of incandescent lamps:
Disconnect the power supply before carrying out the bulb replacement.
Hold and remove the light bulb cover.
Dismantle the old bulb by unscrewing it counterclockwise. Replace with a new
bulb (max. 15W) by screwing it clockwise, and make sure it is fixed in the bulb
holder tightly.
Reassemble the light cover and reconnect your freezer to the power supply.
2.5 Starting to use
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from
•
heat producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance.
•
Overloading the appliance forces the compressor to run longer. Foods that
freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in
•
the appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or
•
paper toweling. Liners interfere with cold air circulation, making the appliance
less efficient.
•
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as
possible.
The freezer shall stay for half an hour before connecting
power when it is firstly started.
The freezer shall run 2 to 3 hours before loading fresh or
frozen foods. The freezer shall run for more than 4 hours in
summer
in
advance
temperature is high.
considering
11
that
the
ambient
V.1