Charging The Battery - Kamikaze KV380 Manual Del Usuario

3 Rated Power
4 Rated Current
5 Current Protection Stop Point
6 Protection Level
7 Weight
1 Capacity
2 Voltage
3 Operating Hours
4 Weight (battery)
1 Input Voltage
2 Output Voltage
3 Recharging Current
4 Protection Level
5 Charging Time
* 3500 cuts/per battery charge – Cutting Ø = 15 – 20 mm

10 Charging the Battery

Do not dispose battery under high temperature or vibration environment to avoid liquid
leakage from the battery.
isconnect the battery from tool before charging.
D
Always make sure the battery is dry and clean before charging.
• Make sure the battery is fully charged before first time using.
• The battery is not fully charged when you buy, you must charge 3-4 hours before using first time.
• Before recharging the battery, check the remaining charge on the display.
• Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
• Keep safety rules and environment protection information in mind all the time.
10.1 Battery charging procedure.
• Recharge in a closed environment, at a temperature between + 10 ° C and 22 ° C.
• The three-way battery charger allows you to recharge all three supplied batteries at the same time.
80
Battery (lithium-ion)
Charger
300 W
14.0 A
≥40A
Ⅱ
0.79Kg
2.5 Ah
21.6V
3500 cuts *
0.36kg
100-240V AC ,50-60Hz
DC21V
1.4A
Ⅱ
3-5h