Publicidad
Idiomas disponibles
Idiomas disponibles
6
Volt™ 9
Electric Fan Heater
Maintenance
WARNING
■ NEVER SERVICE THE HEATER WHILE IT IS
PLUGGED IN, RUNNING OR HOT. SEVERE
BODILY INJURY OR ELECTRIC SHOCK MAY
OCCUR.
■ ONLY QUALIFIED PERSONS ARE ALLOWED
TO OPEN HEATER FOR SERVICE.
NO USER-SERVICEABLE PARTS INSIDE.
■ Keep heater clean. Use pressurized air to blow
fan blades clean. Note! Use moderate pressure to
avoid damage to fan blades
■ Inspect heater before and after each use
■ The fan motor is sealed and has permanently
lubricated bearings
Wiring Diagram
6 kW 9 kW
C
Contactor
M
Fan Motor
R1-R3
Heating Element
S1
Toggle Switch
S2
Ambient Thermostat
Owner's Manual • Volt™ 9
Storage Instructions
When not in use, the heater must be disconnected
from power source, cleaned of dust and stored in a
dry place.
The power supply cord should be loosely wound
around the handle of the heater.
S3
Overheat Limit Switch
S4
Toggle Switch 6kW (Optional)
X1
Terminal Block
X2
Grounding Lug
X3
Power Cord & Plug
t
Publicidad
