Oil Change; Exhaust Filter Change - Komet TopVac Instrucciones De Operación

Maintenance and Troubleshooting
8.3

Oil Change

Danger!
Electric shock possible!

Pull out the main power plug before starting work!

Handle and eliminate the old oil according to the applicable
regulations.
Caution !
Oil type to be used, see chapter : "Technical Data"
For oil change the pump has to turned off, warm (through operation) and under
atmospheric pressure (no vacuum in chamber).

Unplug the machine from the power connection.

Open the service lid (rear side) with an Allen key.

2.
Remove the oil filling screw

Let the oil drain through the oil drain screw

Screw up again the oil drain screw.

Fill it up with new oil.
3
(6 m /h pump: 0,2l).

Close the oil inlet with the oil filling screw

Close the service lid again.
Operating Instructions - Translation
4
into an appropriate recipient.
2
.
8.4

Exhaust Filter Change

Danger!
Electric shock possible!

Pull out the main power plug before starting work!

Unplug the machine from the power connection.

Open the service lid (rear side) with an Allen key.

1
Take out the exhaust filter from the filter casing turning it contrary to the clock
direction.

Screw the new exhaust filter and turn it to fasten it slightly.

Close the service lid again.
DVP LB.6 - Pump 6 m
19 04 272 - 01.01.2012
1
3
/h
Eng - 17/20