Parameter Editing Commands; Struttura Del Menù - PEDROLLO E1 MONO Instrucciones Originales De Uso

PARAMETER EDITING COMMANDS

After entering the desired menu:
• Press the key in order to edit the parameter value.
• Press the or key to edit the parameter value.
• Press the
key to confirm the choice.
• Press the key to display the next parameter or the
If you press the
STRUTTURA DEL MENÙ
SELECT
Œ
LANG.CONFIG
SELECT

AUTOMATIC
SELECT

MANUAL
SELECT

PUMP1 CONFIG
50 | ENGLISH
key while editing a value without first pressing the
Set the control panel language
9
LANG.CONFIG
LANGUAGE:ENG
Automatic operating mode
Manual operating mode
Electric pump no. 1 configuration
9 PUMP1 CONFIG
WIZARD
PUMP1 CONFIG
CURRENT:5.0A
PUMP1 CONFIG
CURR TOUT:7s
PUMP1 CONFIG
VOLT MIN
PUMP1 CONFIG
VOLT MAX
PUMP1 CONFIG
VOLT TOUT
PUMP1 CONFIG
COSFI MIN:0.50
PUMP1 CONFIG
COSFI TOUT:5s
PUMP1 CONFIG
CURR MIN
PUMP1 CONFIG
CURM TOUT
PUMP1 CONFIG
MOT PROT:OFF
PUMP1 CONFIG
DISABLE:OFF
key to exit from the menu.
Select the desired language
Self-learn configuration (wizard)
Electric pump maximum current
Overcurrent trip delay
Minimum operating voltage
Maximum operating voltage
MAX/MIN voltage trip delay
Electric pump minimum cosφ
Dry running trip delay
Minimum operating current
Undercurrent trip delay
Motor thermal cut-out
Electric pump no. 1 enable/disable
key, the parameter will not be saved.