WARNING!
•
Foreign matter left in the pump filter can damage your machine or cause
it to make noise.
•
When the product is not in use, turn off the tap, remove the supply hose
and drain the water inside the machine to avoid any risk of freezing.
•
After each use, turn off the machine's water supply tap.
To clean the dirty filter and drain the water:
1.
Unplug the machine to disconnect the power supply.
WARNING!
•
The temperature of the water contained in the machine can rise up to
90 °C. To avoid the risk of burns, clean the filter after the water in the
machine has cooled down.
2.
Open the filter cap.
3.
Follow the steps below to drain the water.
If the product has an emergency drain hose, follow these steps to drain the water:
a
Take the emergency drain hose out of its housing.
b
Put a large container at the end of the hose. Drain the water in the container by
removing the plug at the end of the hose. When the container is full, replace the cap
on the hose. After emptying the container, repeat the above operation to empty the
water completely from the machine.
87