VALBERG WT 612 D W566C Instrucciones De Uso página 5

B
Using the appliance
Remove transport bolts
WARNING!
• You must remove the transport bolts from the backside
before using the product.
• You'll need the transport bolts again if you move the
product, so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
ΠLoosen 4 bolts with spanner and then remove them.
 Stop the holes with transport hole plugs.
Ž Keep the transport bolts properly for future use.
WARNING!
You must remove the transport bolts from the backside
before using the product.
1
ΠLoosen the 4 transport bolts with a spanner.
 Remove the bolts including the rubber parts and keep them for future use.
Ž Close the holes using the cover caps.
Levelling the washing machine
WARNING!
The lock nuts on all four feet must be screwed tightly against
the housing.
2
6 EN
B
Using the appliance
ΠLoosen the lock nut.
 Turn the foot until it reaches the floor.
Ž Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and
steady.
Connect the water supply hose
WARNING!
To prevent leakage or water damage, follow the instructions
in this chapter
• Do not kink, crush or modify water inlet hose.
3
Connect the water supply hose to the water inlet valve and a water tap with cold water as
indicated.
NOTE
Connect manually, do not use tools. Check if the connections
are tight.
7 EN