Before Use; Safety Instructions - LIGHTSIDE Mirror Ball SET20 Manual De Usuario

SET 20
ENGLISH
Thank you for buying this LIGHTSIDE product. To take full advantage of all possibilities
and for your own safety, please read these operating instructions very carefully before
you start using this unit.
FEATURES
This device has been designed to produce decorative e ect lighting and is used in light
show systems.

BEFORE USE

• Before you start using this unit, please check if there's no transportation damage.
Should there be any, do not use the device and consult your dealer rst.
• Important: This device left our factory in perfect condition and well packaged. It is
absolutely necessary for the user to strictly follow the safety instructions and warnings in
this user manual. Any damage caused by mishandling is not subject to warranty. The
dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
• Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to
add this user manual.

SAFETY INSTRUCTIONS

• To protect the environment, please try to recycle the packing material as much
as possible.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• This unit is for indoor use only.
• Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result. If a foreign object enters the unit, immediately disconnect the mains power.
• Locate the fixture in a well ventilated spot, away from any flammable materials and/or
liquids. The fixture must be fixed at least 50cm from surrounding walls.
• Don't cover any ventilation openings as this may result in overheating.
• Prevent use in dusty environments and clean the unit regularly.
• Keep the unit away from children.
• Inexperienced persons should not operate this device.
• Maximum save ambient temperature is 45°C. Don't use this unit at higher ambient
temperatures.
• The units' surface temperature may reach up to 85°C. Don't touch the housing with
bare hands during its
operation.
• Make sure the area below the installation place is free from unwanted persons during
rigging, de-rigging and servicing.
1