Sime SHP M PRO Manual De Funcionamiento página 108

Use " " to turn on/off "CURRENT STATE", and use''▼'', ''▲'' to adjust
the operate date and start time of disinfect function.
Example: If "OPERATE DAY" is set FRIDAY and "START" is set 23:00,
the disinfect function will be activated at 23:00 on Friday.
6.2.2 FAST DHW
The FAST DHW function is used to force the system to operate in DHW
mode.
Once the FAST DHW function is activated, the heat pump and the booster
heater (or auxiliary heater) will run together or the pump runs itself.
Go to " " > '' DOMESTIC HOT WATER(DHW)'' >"FAST DHW". Press
'' '', the following page will appear:
Use " " to turn on/off "CURRENT STATE" of FAST DHW function.
The FAST DHW function is valid only when "CURRENT STATE" is
set ON.
The FAST DHW function is valid only for once after it's settled.
DOMESTIC HOT WATER（DHW）
DIS- FAST TANK
INFECT DHW HEATER
CURRENT STATE
ON/OFF
INFORMATION
i
34
DHW
PUMP
OFF