Sime SHP M PRO Manual De Funcionamiento página 116

Press '' '' again, "MON" is selected as shown below. It means Monday has
been selected.
Then use " ▼ " to move cursor to "ENTER", press " ", operation mode and
temperature of Monday can be set.
The following page will appear:
The parameter setting method is the same as that of "TIMER". (Please refer
to 6.3.1 TIMER)
The parameter setting method for other days of one week is the same.
The setting method of WEEKLY SCHEDULE for DOUBLE ZONE is the
same as ONE ZONE.(To know how to switch from ZONE1 to ZONE2,
please refer to 6.3.1 TIMER)
SCHEDULE
WEEKLY SCHEDULE
TIMER
SCHEDULE CHECK
MON.
TUE. WED. THU. FRI. SAT. SUN.
ENTER CANCEL
MON SELECT
SCHEDULE
WEEKLY SCHEDULE
TIMER
SCHEDULE CHECK
NO. START END MODE
1 00:00 00:00 HEAT
2 00:00 00:00 HEAT
3 00:00 00:00 HEAT
42
CANCEL
TIMER
1/2
CANCEL
TIMER
TEMP
0℃
0℃
0℃