Infiniton HBV-348C Instrucciones De Uso página 4

Page 3 of 3
maximum power.
AUTO SATETY SHUT OFF
The heater has a built-in safety device, which will switch the heater OFF in case of accidental overheateing. To reset the
heater, follow the next steps:
·Turn the control setting to the 'O' position.
·Unplug the heater and wait 5-10minutes for the unit to cool down.
·After the unit has cooled, plug it in and operate normally.
·Turn function switch into desired position(Fan, Low or High).
·Turn the thermostat switch to the desired temperature position.
·When you feel the room temperature comfortable, turn the thermostat switch anti-clockwise slowly to the minimal
direction until the appliance switches off.
·The thermostat switch will keep the room temperature at the desired temperature automatically.
· You can also turn the thermostat switch anti-clockwise to the minimum position or turn the thermostat switch clockwise to
the maximum position to make the temperature lower or higher.
Note: NEVER COVER THE HEATER
DO NOT IMMERSE IN WATER OR ANY LIQUID
CLEANING AND MAINTENANCE
·Be sure to switch off the power supply and pull out the plug out the plug before cleaning.
·Wait for the heater to cool down sufficiently.
·Clean the body of the heater with a dry cloth. DO NOT ALLOW water into the appliance.
·DO NOT use soap or chemicals which may damage the housing of the heater.
·Allow sufficient drying time before operating again.
·Clean the air inlets and outlets regularly with a vacuum cleaner(with regular use ,at least twice a year)
·When the unit is not in use, we recommend that the heater is re-packed in its original packaging and stored in a cool, dry
place.