Descargar Imprimir esta página

Important Safety Information - MAC TOOLS MPF59038 Traducido De Las Instrucciones Originales

Ocultar thumbs Ver también para MPF59038:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
EnGlIsh

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

IMPORTANT SAFETY INFORMATION


WARNING : Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
READ THIS MANUAL BEFORE OPERATING THE
MACHINE
SAVE FOR FUTURE REFERENCE
FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
Do not use damaged, frayed or deteriorated air hoses
and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may be
harmful to your hands and arms . Stop using any tool if
discomfort, tingling feeling or pain occurs. Seek medical
advice before resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not overreach
when operating this tool.
Always turn off the air supply and disconnect the air
supply hose before installing , removing or adjusting
any accessory on this tool, or before performing any
mainte nance on this tool.
Wear hearing and ear protection when operating this
tool. Always wear impact resistant eye protection when
operating or performing maintenance on this tool.
Protect the eyes against flying objects, such splinters
and dust.
Always wear respiratory protection when operating
this tool.
16

WARNING : Please read instructions and warnings
for this tool carefully before use . Failure to do so could
lead to serious injury
EMPLOYERS, TOOL OWNERS AND TOOL OPERATORS
ARE RESPONSIBLE FOR THE SAFE USE OF THIS TOOL AND
COMPLIANCE WITH ALL WARNINGS AND INSTRUCTIONS.

WARNING : Before operating, inspect tool to confirm:
That tool is in proper working order,
What actuation system is on tool and how it
operates,
No misalignment or binding of moving parts,
All conditions necessary for proper and safe tool
operation,
All screws and bolts are tight and properly
installed prior to operating the tool. Loose
or improperly installed screws or bolts cause
accidents and tool damage when the tool is put
in operation.
Keep away from unauthorised persons and children.
Always wear ANSI Z87.l eye protection when operating
or performing maintenance on this tool. Everyday eye
glasses are not safety glasses.
Always wear hearing protection when operating
this tool.
Keep hands, loose clothing, jewlery and long hair away
from rotating end of tool.
Do not wear loose-fitting gloves or gloves with cut or
frayed fingers.
Anticipate and be alert for sudden changes in motion
during start up and operation of any power tool
Keep body stance balanced and firm . Do not overreach
when operating this tool.
Use clamps or another practical way to secure and
support the workpiece to a stable platform . Holding
the work by hand or against the body is unstable and can lead
to loss of control.
Do not operate this tool for long periods of time.
Vibration caused by tool action may be harmful to your hands
and arms . Stop using any tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming use.
Unprotected exposure to high noise levels can cause
permanet, disabling, hearing loss and other problems such as
tinnitus (ringing, buzzing, whistling or humming in the ears);
Risk assessment and implementation of appopriate controls
for these hazards are essential.
If the tool is in an area where there is static dust, it may disturb
the dust and cause a hazard.
Stay alert. Do not use the tool while tired or under the
influence of drugs, alcohol , or medication .
Use only impact accessories . Non-impact accessories may
break and cause a hazardous condit ion. Inspect accessories
prior to use to ensure that it contains no cracks.
Do not operate this tool in the presence of flammable
liquids , gasses, dust, or explosive atmospheres

Publicidad

loading