Max ULTIMATE VII Manual Del Usuario página 8

MAX ULTIMATE VII BUILT-IN NAIL DUST
COLLECTOR USER'S GUIDE
General description
The MAX Ultimate VII nail dust collector is designed for use by professional
manicurists. It is used for removal of dust, which appears in the process of nail
filing and removal of artificial coatings.
Usage of the nail dust collector is recommended:
• during gel and acrylic nail extension, nail correction;
• while removing of gel polish and other artificial coatings;
• when performing manicure (especially hardware one).
•
Complete set
1. Dust collector with a filter bag installed.
2. Additional filter bag.
3. Passport.
Operational principles
The manicurist works in the dust collector fan grill area. The dust-air mixture is
sucked with the fan impeller of the dust collector. Clean air flows back into the
room after its filtration through the bag filter. Dust is collected inside the filter.
The manicurist cleans the filter bag after finishing.
Installation of the dust collector
In order to install the dust collector, it is necessary to make an opening in the
desk top according to the pattern (see annex 1).
ENG
Dust collector layout
1. Dust collector top cover.
2. Fan.
3. Detachable air tube.
4. Cord with a plug.
5. MAX Pro speed governor.
6. Key switch.
8