Operation - Klarstein 10041143 Manual De Instrucciones

Drain water completely from the inner water tank and the large water tank
The water from the large water tank is prevented from flowing out by the plug on
the water valve. Plug in the device when you want to drain the water completely,
but do not start the device. Then remove the water drainage cap on the back of
the device. Wait a few minutes until the water has flowed out completely.

OPERATION

Control panel and indicator lights
1. Remove the water tank cover and fill the water tank with drinking water. Make
sure that the water level is always below the maximum mark "FULL" (see
illustration).
Water tank lid
EN
27