NuWave Brio 8Q Manual Del Proprietário página 19

Sear 1 & 2
1. Adjust your cooking temperature and time.
2. Press Sear to engage the Sear 1 function. Adjust the Sear 1
temperature and time, if desired.
3. Press Sear again to add the Sear 2 function. Adjust the Sear 2
temperature and time, if desired.
4. Press START/PAUSE to begin. The Brio will start preheating. Once
preheated, "Sear 1" and ":" will be flashing.
5. Once Sear 1 is finished, the Brio will beep once and will begin the
regular cooking temperature and time set on step 1. After, the Brio will
beep once again and will then go into Sear 2.
6. When the Brio has finished cooking, it will beep 3 times and the LED
display will show "End" .
Sear 2
The default temperature and time is 400F for 5 minutes.
1. Adjust your cooking temperature and time.
2. Press Sear 3 times to engage Sear 2.
3. Adjust your cooking temperature and time up to a maximum of 400F
and 30 minutes.
4. Press START/PAUSE to begin. The Brio will start preheating.
• Once the main cooking cycle has finished, the Brio will beep once
and go into Sear 2 cooking. "Sear 2", and ":" will be flashing.
• When the Brio is finished cooking, it will beep 3 times and the LED
display will show "End".
Note: The Sear temperature and time can be adjusted at any time.
Mute and Unmute the Beep Sounds
To mute the beep sounds, press and hold the Sear + Stage buttons for 1
second. The Brio will remain mute until it is unmuted. Press Sear + Stage
for 1 second again to unmute.
Switching from Fahrenheit to Celsius
To go from Fahrenheit to Celsius, press Sear + temperature Up or Down
arrow. Repeat to change it back.
19
nuwavenow.com