1
2. Press the handle of the mounting clip on the filter
panel underneath the hood (1).
1
2
3. Slightly tilt the front of the filter downwards (2), then
pull.
Repeat the first two steps for all filters.
4. Clean the filters using a sponge with non abrasive
detergents or in a dishwasher.
The dishwasher must be set to a low
temperature and a short cycle. The
grease filter may discolour, it has no
influence on the performance of the
appliance.
Environmental concerns
Recycle materials with the symbol
packaging in relevant containers to recycle it. Help
protect the environment and human health by recycling
waste of electrical and electronic appliances. Do not
22
2
. Put the
5. To mount the filters back follow the first two steps in
reverse order.
Repeat the steps for all filters if applicable.
Replacing the charcoal filter (optional)
Warning! The charcoal filter is NON-
washable! The filter cannot be
regenerated!
To replace the charcoal filter:
1. Remove the grease filters from the appliance.
Refer to "Cleaning the grease filter" in this chapter.
2. Turn the filter counterclockwise (1) and then pull
(2).
To mount the filters back follow the steps in reverse
order.
Replacing the lamp
This appliance is supplied with a LED lamp and
separate control gear (LED driver). These parts can be
replaced by a technician only. In case of any
malfunction refer to "Service" in the "Safety Instructions"
chapter.
dispose of appliances marked with the symbol
the household waste. Return the product to your local
recycling facility or contact your municipal office.
1
2
with