Publicidad
Idiomas disponibles
Idiomas disponibles
IV. WHEELCHAIR USE & CONFIGURATION
D. Transit Use (Continued)
•
The rider must be in a forward-facing position.
•
The rider and all items carried must not weigh more than 165 lbs (75 kg).
•
Some configurations of this model may exceed 28.5 in. (724 mm) in width which is the
minimum width for lift platforms for ADA compliant vehicles.
•
In case of heavy and oversized wheelchairs, transportation in larger vehicles is
recommended when the option exists.
•
Backpacks and pouches should be removed and secured separately in the motor vehicle.
In the event of an accident these items can become dangerous projectiles, which may
injure or kill you or other occupants of the motor vehicle.
•
The rider must use a Wheelchair Tie-down and Occupant Restraint System that complies
with RESNA WC-4, Section 18: Wheelchair tie-down and occupant restraint systems for
use in motor vehicles or ISO 10542-1 Technical systems and aids for disabled or
handicapped persons -- Wheelchair tie-down and occupant-restraint systems -- Part 1:
Requirements and test methods for all systems.
•
Attach the wheelchair tie-downs to the four securement points (two front, two rear) on the
wheelchair with the transit option (Fig. 1) in accordance with the wheelchair tie-down
manufacturer's instructions and RESNA WC-4, Section 18 or ISO 10542-1, - Part 1.
•
Use only designated securement points to secure your wheelchair to a vehicle.
•
Attach occupant restraints in accordance with the occupant restraint manufacturer's
instructions and RESNA WC-4, Section 18 or ISO 10542-1, Part 1.
•
Both pelvic and shoulder belt restraints should be used to reduce the possibility of head
and chest impacts with vehicle components.
Fig. 2
Fig. 1
15
Publicidad
Solución de problemas
