Ki Mobility Little Wave Flip Manual De Instrucciones Y Garantía página 35

IV. WHEELCHAIR USE & CONFIGURATION
S. Backrest (Continued)
How to Adjust a Push Handle Angle
1. If the chair is equipped with a height adjustable backrest, push the buttons of the locking
hinges (Fig. 26:A). Both of the buttons must be pressed simultaneously to adjust the angle.
2. While holding the buttons down, rotate the push handle to the desired position.
3. Release the buttons when the desired angle is achieved.
4. Verify that the hinge is locked by pulling upwards on the push handles.
How to Remove a Stroller Handle
1. Depress the buttons (Fig. 27:A) on both sides of the chair toward the lower end of the stroller
tubes to disengage the locking tabs.
2. Pull the handle out of the receivers to remove or push the stroller handle into the receivers to
install. For best results, insert both sides at the same time.
Fig. 26
A
A
Fig. 27
34