Before Using For The First Time; Blender Assembly Instructions - Bella Professional 90018 Manual De Instrucciones

SO-304058_90018_IM r3:Layout 1

BEFORE USING FOR THE FIRST TIME

CAUTION: Use extreme care when handling blades. Do not touch the blades with your fingers.
The blades are very sharp and can cause injury if touched.
1. Carefully unpack the Blender, glass blending jar, and all parts.
2. Wash the blending jar lid, measuring cap, glass blending jar, rubber seal ring,
collar, and cutting blade in warm soapy water.
3. Rinse and dry thoroughly.
4. Make sure the cord is unplugged and all control panel indicator lights are off.
CAUTION: To protect against risk of electrical shock, do not place motor housing,
plug or cord in water or any other liquid.
5. Wipe the motor housing clean with a moistened cloth.
6. Dry thoroughly.

BLENDER ASSEMBLY INSTRUCTIONS

NOTE: Before assembling, make sure the cord is unplugged and all control panel indicator lights
are off.
CAUTION: Use extreme care when handling the blades.
Do not touch blades with your fingers. The blades are very sharp and can cause injury if touched.
1. See Figure 1. Carefully place the rubber seal ring over the cutting blade. These two pieces
combine to create the blade assembly.
2. Place the blade assembly into the glass blending jar.
3. Place the collar over the blade assembly. Hold the glass blending jar and turn the collar
counter-clockwise to firmly secure it into position on the glass blending jar.
NOTE: The collar and blade assembly must be firmly attached to the blending jar
before putting any foods or liquids into the blending jar.
All manuals and user guides at all-guides.com
9/4/08 4:57 PM
6
Page 6