Erreka CICLON CLS210 Manual Del Instalador página 48

INSTALLATION
Connect the motor to the control panel (AEP20PIL)

Before making any electrical connections,
check the
manual.

Before carrying out any gate movement,
ensure there is no person or object in the
radius of action of the gate and the
operation mechanisms.
1 Connect the motor (M1, M2) and the capacitor
(C1, C2) to the control panel.

Connect the motor's earth cable to the
earth terminal (T) on the control panel.
C1, C2: capacitors
E1: encoder A1
1 Red:
2 Copper shield: (-)
3 Blue:
E2: encoder A2
4 Red:
5 Copper shield: (-)
6 Blue:
44
Installation manual
control panel instructions
G2: motor A2
7 Brown:
8 Black:
(+)
9 Grey:
signal F2: brake A2
10 Orange
11 Violet
(+)
T Yellow-green: earth
signal
2 Connect the control panel to the power supply.
3 Activate the power supply switch.
4 Using the control panel mini push buttons
(PUL1, PUL2, PUL3, PUL4), check the motor
connections are correct (rotation direction).

If the rotation direction is not correct,
interchange the wires 12 and 13 of M1 or 7 and
8 of M2, as appropriate.

Ensure the earth cable of the motors is
connected to the control panel earth
terminal.
G1: motor A1
turn 1 12 Brown:
turn 2 13 Black:
common 14 Grey:
F1: brake A1
15 Orange
16 Violet
T Yellow-green: earth
turn 1
turn 2
common