Publicidad
Idiomas disponibles
Idiomas disponibles
The first time you put your appliance into operation, set the thermostat to the
middle position "4" and let it run empty for 4 hours for it to cool down sufficiently.
Appliance thermostat has 7 settings. The appliance assures that temperature is
maintained as long as it is in operation and that it is used in normal conditions of
use. The temperature inside the appliance can be influenced by many factors:
ambient temperature, sun exposure, number of door opening and amount of food
stored... The slight changes in temperature are perfectly normal.
• Settings 1 to 3: compartment average temperature 10 to 14 °C
• Settings 4 to 5: compartment average temperature 6 to 10 °C
• Settings 6 to 7: compartment average temperature 2 to 6 °C
NOTE:
▪ Turning the temperature control to "0" position stops the cooling cycle but
does not shut off the appliance.
▪ If the unit is unplugged, lost power, or turned off; you must wait 3 to 5
minutes before
▪ Restarting the unit. If you attempt to restart before this time delay, the
appliance will not start.
▪ If you choose to change the thermostat setting, adjust thermostat control by
one numerical increment at a time. Allow several hours for temperature to
stabilize between adjustments.
Do not leave the door open for too long so that the indoor temperature does
not rise too much.
5. CARE AND MAINTENANCE
Defrost
After some time, frost will form on the surface of the evaporator. The thicker the
frost is, the hotter resistance is. The hot resistance will reduce the effect of the
refrigerant. Please defrost, when the frost layer is thicker than 2 mm.
1. Please set the control knob to "0".
12
Publicidad
