universalblue UBF2206-20 Manual De Instrucciones página 41

All users should become familiar with the instructions. Knowing
what can go wrong can be of help to prevent further problems are
caused.
Problem
The
appliance
does not
work
The device
does not
work properly
The
appliance is
cooling more
than
expected
The
appliance is
not cooling
as expected
Make sure that the device is correctly plugged
in, that the fuse is not blown or that a power
failure has not occurred.
The room temperature is too low. Try adjusting
the camera temperature to a cooler level to
solve this problem.
It is normal for the freezer not to operate during
the automatic defrost cycle or for a short period
of time after the appliance is turned on to
protect the compressor.
The temperature knob it may be at the
maximum position.
If you have placed food that contains a lot of
moisture under the cooling vents, remove the
food from the area.
The food may be too close which will block the
air circulation. You may have placed hot foods
or too many foods inside the refrigerator. The
door may not be closed correctly. The rubber on
the door may be damaged. The refrigerator may
not be ventilated. There may not be enough free
space between the top and side spaces of the
refrigerator and other surfaces.
The temperature
positioned correctly.
Solution
regulator may not be
41