Factory Data Reset - PROZIS Pix-E Avant Manual Del Usuario

WI-FI
1. Select the "Settings" icon on the projector's main interface and then "WIFI". Select the
"ON/OFF" icon next to the word Wi-Fi to turn Wi-Fi on or off.
2. Choose the Wi-Fi network and enter the password to connect.
BT
1. Select the "Settings" icon and then "BT".
2. Select "Projector", rename it and click "OK".
3. Select "Available equipment" and choose the available device.
EASY WI-FI HOTSPOT
1. Select the "Settings" icon and then "Convenient hot spot". Select "OFF" to turn Easy
Wi-Fi Hotspot on.
2. Reset "Network SSID" > "Password" > "Choose security" > "Select AP band". Choose
"Save" to save the message.
3. Use the smartphone to select this hotspot and enter the password to connect and share
the screen on the projector.
ETHERNET
The Ethernet adapter cable is not included. You need a USB adapter to connect USB to
Ethernet.
HDMI
The HDMI input function is manly used to transmit information from other devices (your
laptop, gaming device, or television) to the projector.
CONNECT THE PROJECTOR TO THE COMPUTER
• Locate the USB input on the device.
• Plug one end of the USB cable to the projector and connect the other end to the comput-
er's USB port.
• Select the "Settings" icon and find the "Developer Options" menu.
• Select "USB". The word "ON" will pop up next to "USB".

FACTORY DATA RESET

• Select the "Settings" icon on the main interface and find the "Other settings" menu.
• Select "Factory data reset" and then "Ok" to delete and reset all data.
APK DOWNLOAD AND INSTALLATION
• Select the "Apps" icon on the main interface and then the "APKInstaller" icon.
• Choose the "App Install" icon. You can install apps from microSD™ cards, USB drives or
the Play Store.
EN
8