Your Product; General Safety Instructions; Intended Use - Vermeiren 2217E Manual De Instrucciones

1. Your product

2217E and 2219E offer the same functionalities and options as 2217 and 2219, with the addition
of pedal assistance. Read the user manual for 2217 and 2219 before using your tricycle.

2. General safety instructions

• The warranty of this product is based on normal use and maintenance as described in this
manual. Damage to your product caused by improper use or lack of maintenance will cause
the warranty to lapse.
• Follow all local laws and regulations.
• Practice riding in a safe area free from hazards.
• Only use the battery charger delivered with the device. The use of any other charger may be
dangerous (fire hazard).
• The battery charger is only intended to charge the batteries delivered with the tricycle, not to
charge any other batteries and will void the warranty.
• All components of the pedal assist system are matched to each other. Never modify the system
and do not adapt any of the delivered parts, like cables, plugs or battery charger. Never open
or change the battery or the connection points.
• Protect the battery and battery charger against flames, high and low temperatures, moisture,
sunshine, severe shocks (for example dropping). Do NOT use the battery if this has been the
case.
• To avoid short circuit, do not use metal items near by the battery (ex. paper clips, coins, nails).
• Remove the battery from the tricycle before transporting the tricycle in a car.
• Use the charger in dry indoor environment only.
• Ensure good ventilation of the battery compartment. Do not cover the charger while charging.
• Unplug the charger from the wall outlet when not in use.

3. Intended use

The tricycle with pedal assistance is intended for users with reduced muscular power in their legs.
The intended use environments are paved roads and on gravel roads that are smooth. The device
is not intended to be used on off-road or mountain bike use, or for any kind of jumping or racing.
4. Mounting / removing battery
1
To remove the battery:
1. Place the key .
2. Turn the key  to the unlock symbol.
3. Pull the battery gently out of the battery housing.
2217E, 2219E
To mount the battery:
1. Place the key  and turn the key towards the
Unlock
unlock symbol.
2. Place the battery in the battery housing as far as
Lock
possible. There is only 1 possible way to insert the
battery.
3. Turn the key  to the lock symbol.
4. Make sure that the battery is fixed well.
5. Remove the key . (Never remove the key while
riding).
1
EN
2217E, 2219E
2022-08
NL