Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
Install the Spout
‰ Remove the tee assembly, nut, and washer from the spout shank.
‰ Ensure that the seal gasket or O-ring is installed to the underside of the spout.
‰ Fit the spout shank through the top of the lavatory.
‰ Install the washer and nut onto the spout shank. Tighten the nut with a wrench to secure.
‰ With the screen cone facing downward, insert the rubber screen gasket and nylon washer into the tee.
Thread the tee onto the spout shank.
‰ Hold the spout in position and tighten the tee securely. Do not overtighten!
‰ If desired, apply a bead of 100% silicone sealant or caulk around the base of the spout.
1491057-2-A
3 of 20
1. INSTALL THE SPOUT
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Lavatory Faucet
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Publicidad
