Operating The Hot And Cold Plate - Hupfer KWP Manual De Instrucciones

Operating Instructions
EN
ATTENTION
Damage to property
Insufficiently temperature-resistant containers may be damaged
when used on the hot and cold plate.
►
Only use food storage containers that are sufficiently
temperature-resistant over the entire adjustable temperature
range.
ATTENTION
Heat accumulation
If the cut-out for supply and exhaust air is blocked or is too small,
heat builds up. Heat accumulation has a negative impact on
operation.
►
Do not close the cut-out for supply and exhaust air.
During operation, the hot and cold plates keep food containers with
contents above the preset surface temperature at a constant
temperature. For support, a Hupfer heated lamp gantry can be
installed over the hot and cold plate. When the hot and cold plate is
operated in heating mode, the infrared lamp of the heated lamp gantry
is active.
When the hot and cold plate is operated in cooling mode, the colour-
matched LED illumination of the heated lamp gantry is active.
For further information on the heated lamp gantry, please refer to the
operating instructions for the heated lamp gantry.
8.1

Operating the hot and cold plate

The hot and cold plate is operated via the display built into the same
structure.
If the hot and cold plate is installed together with a heated lamp gantry,
the heated lamp gantry is also operated via the display and supports
the function of the hot and cold plate.
Controls and display for hot and cold plate
Hot and cold plate
Page 17