Maintenance - Osmofilter TM68 Manual De Usuario

05.

MAINTENANCE

PRACTICAL TIPS:
VERY IMPORTANT: Periodically check the clock water softening coincides with the official time of the
country.
Periodically check the level of salt in the tank.
USE ONLY SALT IN PILLS, ESPECIALLY FOR DESCALERS (VACUUM).
- Periodically clean or replace the sediment filter.
- To change the sediment filter and the silico-phosphate filter, follow these steps:
- Close the main switch of the installation site.
- Open a faucet to depressurize the installation.
- Set the Bypass control to "CLOSE" (closed).
- Remove the sediment filter from the container and replace it with a new one.
The sediment filter must be replaced when it becomes dark brown. This will depend on the quality and turbi-
dity of the water. Proceed in the same way if you also need to replace the silico-phosphate filter. The silicoo-
phosphate filter must be replaced when the level of the balls has significantly decreased or disappeared.
- Reseat the equipment and the container vessels with the filter elements to their initial state.
- Open the main switch of the installation.