Pack Contents - SOMFY 1875100 Manual

Opening detector for aluminium joinery
Thank you for purchasing an opening detector for aluminium joinery to be associated with your Somfy
Protexial io alarm system.
This product is guaranteed for 5 years from the date of purchase.
• Do not install or use the product outdoors.
• Do not subject the product to impacts or drops, or expose it to flammable materials or a heat source, or to moisture or
splashing liquid, and do not immerse it in liquid.
• Do not use abrasive products or solvents to clean it.
This opening detector for aluminium joinery is compatible with a Somfy central unit :
PROTEXIAL IO (versions 2010 and follows)
J
Read this manual totally to install it.
HOME KEEPER
J
To install it :
In connected mode, recommended by Somfy, that means with the central unit is linked to
−
internet, the installation of this detector must be done with a smartphone thanks to the free
Home Keeper PRO application. Let follow the step by step intuitive guide, which allows you
to install this detector quickly, to personnalise the settings and the life modes, and to test the
installation.
In non connected mode, that means with the settings done thanks to the Home Keeper LCD
−
keypad, read this manual without taking into account the chapter "Affect a zone to the opening
detector" in page 18.
The opening detector will be active in Night mode and in ON total mode.
We recommend that you:
read this manual carefully and make absolutely sure that you follow all the mounting and operating
J
instructions in order to get the best possible use from this product,
keep this manual in a safe place for the entire lifetime of the product.
J
Introduction
Designed for indoor use, this opening detector uses a
wireless magnetic contact to allow you to protect:
a sliding window or window with a frame primarily
J
made of aluminium, reinforced PVC, but also any other
material,
2 sliding windows using a 2
J
(ref. 1875105) or brown magnet (ref. 1875104),
an armoured door, for example, a main entrance door
J
to be protected.

Pack contents

(a) 1 opening detector with its 2 m cable
(b) 1 CR2450 lithium battery
(c) 1 terminal and its cover
(d) 1 magnet
terminal/white magnet
nd
a
f
g
(e) 2 spacers
(f) Screws + anchors for the detector
(g) Screws for the terminal and the magnet
(h) Manual
b
c
e
d