These instructions must be read carefully and thoroughly before beginning work. BMW accepts no
liability for damage caused by failure to observe the installation instructions.
This retrofit kit may only be installed by an authorized dealer with the required special tools. We hereby
draw attention to the fact that installation by unauthorized personnel may involve considerable risks to health.
Furthermore, in this case all guarantee claims shall become invalid. Equally, no liability claims against BMW AG
can be entertained.
The following symbols are used in these instructions for safety notes:
d
Warning:
Cautionary rules
and measures
which can protect
the driver or other
persons from
injury or death.
We offer our customers a wide range of tested accessories and special equipment. For this reason it is not
possible to cover all the possible variations in these installation instructions. Thus we have restricted our
description to correspond with the basic version of the respective model. The dismantling and assembly of
accessories is described in the respective instructions. If you no longer have the necessary instructions,
please consult your BMW motorcycle dealer.
10
e
Attention:
Special notes and cau-
tionary measures which
can prevent damage to
the motorcycle. Failure
to observe these can
result in nullification of
the guarantee.
L
Note:
Tightening moments:
Tips for facilitation
The screws and nuts are tight-
of operation, con-
ened in accordance with
trol and adjust-
DIN EN 24 014 or DIN 912 ISO.
ment, as well as
Divergent tightening moments
maintenance work.
are specified. Non-compliance
with these regulations may
cause damage to the motorcy-
cle or endanger the driver.
X