Electrical Connection - Oster OS-SBS21SSEH Manual De Instrucciones

POSITIONING
Install this appliance at a location where the ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the appliance:
LOCATION
The appliance should be installed well away from sources of heat such as radiators, boil-
ers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
To ensure best performance, if the appliance is positioned below an overhanging wall
unit, the minimum distance between the top of the cabin-net and the wall unit must be at
least 100 mm. ideally, however, the appliance should not be positioned below overhanging
wall units. Accurate leveling is ensured by one or more adjustable feet at the base of the
cabinet.
WARNING: To avoid risk due to instability of the device, it must be fixed in accordance
with the instructions.
WARNING! It must be possible to disconnect the appliance from the mains power supply2
the plug must therefore be easily accessible after installation.

ELECTRICAL CONNECTION

Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-
spond to your domestic power supply. The appliance must be earthed. The power supply
cable plug is provided with a contact for this purpose. If the domestic power supply socket
is not earthed, connect the appliance to a separate earth in compliance with current regu-
The manufacturer declines all responsibility if the above safety precautions are not ob-
served. This appliance complies with the E.E.C. Directive
English-11