Stroller Assembly; Stroller Operation - BABY MONSTERS EASY TWIN 4 Manual Del Usuario

Stroller Assembly

A. Open Stroller
Open frame lock then lift handle bar until stroll is fully opened.
B.Assemble Canopy and Shoulder Pads
Fabric portion of canopy as well as shoulder pads are separately supplied in EASY TWIN 4
Accessory Pack.
B-1. Assemble fabric portion and metal bar.
B-2. Attach canopy to Stroller.
B-3. Thread shoulder strap through shoulder pads.
C.Assemble Front wheels
To remove the front wheel, press the release button on front wheel housing and the front wheel
will detach.
D-1.Assemble Rear Wheels
D-2.To remove the rear wheel, pull the metal tab gently and pull wheels outward.
E-1.Assemble Bumper Bar
E-2.To detach, press the button at inner side to release the bumper bar.

Stroller Operation

F.Adjust Recline
G.Use Harness and Buckle
In order to protect your child from falling out, after your child is placed into the seat, check
whether the shoulder and waist harnesses are at proper height and length and adjust whenever
needed by putting the harness anchors in suitable slots according to child's shoulder height.
CAUTION:
• To avoid serious injury from falling or sliding out, always secure your child with
harness.
• Make sure your child is snugly secured. The space between the child and the shoulder
harness is about the thickness of one hand.
• Do not cross the shoulder belts. This will cause pressure on a child's neck.
H .Adjust leg rest
The leg rest has 3 positions.Press button on both sides of leg rest at the same time to lower the
leg rest; lift to adjust leg rest to higher positions.
I. Front Wheel Swivel Lock
It is recommended to lock the swivel wheels when traveling on uneven surfaces.
To lock, slide the tab on front wheel housing toward center; to unlock, slide the tab outward to
swivel.
English